Dealer LoginDEALER LOGIN Site MapSITE MAP

ALUMINUM & NONFERROUS METAL



SBNF-100100
FEATURES
- Professional Grade C-1 Carbide
- Negative Hook Angle
- Copper Plugged Expansion Slots
- Triple Chip Grind
- Tensioned & Hardened Steel Plate
- Surface Ground Steel Plate
Low RPM Dry Cut Table Portable Radial
Miter Worm Drive Plastic Aluminum & Nonferrous Metal

Our nonferrous blades have been designed with a negative hook angle, triple chip tooth grind, and precision ground micro grain carbide tips. The specially formulated tungsten carbide lasts longer than other carbide grades and leaves burr free cuts in all types of nonferrous metals, such as: aluminum, copper, brass, bronze, and even most plastics. The 10” and larger feature copper plugged expansion slots for reduced noise and vibration while several of the smaller diameter blades feature laser cut expansion slots and heat vents for cooler operation.


ITEM # DIAMETER TEETH ARBOR KERF GRIND IMAGE
SBNF-045030 4-1/2" 30 3/8" 0.079" TCG SBNF-045030
SBNF-045130 4-1/2" 30 7/8" 0.079" TCG SBNF-045130
SBNF-054050 5-3/8" 50 20mm with
5/8" & 10mm Bushings
0.063" TCG
SBNF-059052 5-7/8" 52 20mm with
5/8" Bushing
0.063" ATB
SBNF-065060 6-1/2" 60 5/8" ◊ 0.075" TCG
SBNF-070054 7" 54 20mm 0.075" TCG
SBNF-072540 7-1/4" 40 5/8" ◊ 0.075" TCG
SBNF-072560 7-1/4" 60 5/8" ◊ 0.075" TCG
SBNF-080060 8" 60 5/8" ◊ 0.083" TCG
SBNF-090080 9" 80 1" 0.094" TCG
SBNF-100060 10" 60 5/8" 0.110" TCG
SBNF-100100 10" 100 5/8" 0.110" TCG
SBNF-120080 12" 80 1" 0.118" TCG
SBNF-120120 12" 120 1" 0.118" TCG
SBNF-140100 14" 100 1" 0.138" TCG
SBNF-1501101 15" 110 1" 0.138" TCG


Designed For
1 Hitachi®

WARNING: Never attempt to cut steel or ferrous metals with these blades. It is highly recommended that you use a liquid lubricant or coolant like WD-40 when cutting nonferrous metals. Proper clamping devices should be employed.
Home | All Products | New Products | Support & Services | Where to Buy | Product Reviews
Company Information | View Catalog | Contact Us | Dealer Login | Site Map

All trademarks and tradenames are property of their respective owners. Oshlun, Inc. reserves the right to make changes in product look, design, and specification without prior notice. Product images are for illustrative purposes only and may not represent the actual product look or design.
Copyright© 2023 by Oshlun, Inc. All Rights Reserved.